Basement Waterproofing: DIY Tips And Techniques

Published: 11th July 2012
Views: N/A

Basement waterproofing is not a simple task. However, it can be manageable if you have the right tools, purchase the right materials, and have the right instructions. This article will provide you with basic waterproofing tips and techniques in order to avoid hiring foundation repair specialists.

Distinguish Seepage from Condensation

A moist basement does not always mean a problem with your waterproofing. This is because sometimes moisture does not get in from the exterior but comes from excessive moisture within the interior of the basement. In order to determine the source of the moisture, tape an aluminum foil in the middle of your basement, at a place that is usually moist. Leave it there for 2 to 3 days and then remove the same. If the area where the foil was placed is wet but the surrounding area is dry, then you have a waterproofing issue. If the area where the foil was placed is dry but the surrounding area is wet then you have a problem with condensation.

Assess the Situation

It is important to remember that you can DIY but only if the damage is not extensive. If the reason for your moist or flooded basement is because of serious structural problems then you need to hire a professional. However if your problem is just a bit of moisture coming from small cracks on the floor, wall and/or ceiling of your basement then repairing the damage can be done via DIY.

Prepare the Surface Area

If your basement is prone to moisture, molds, and mildew and there is no serious crack in the structure, then what you need to do is recoat or coat the surface with waterproofing materials. Clean the entire surface area by scrapping, chipping off, brushing any loose materials, powdery cement, caked paint, dust, molds, grease etc. It is very important to focus on points that are prone to moisture but it is imperative that you check every bit of your basement to ensure you do not miss a crack or two.

Select the Materials to Use

There are several to choose from (i.e. paint, cement, sealants, etc.). Bear in mind that different types work with different problems. It is important to inquire with your local hardware store for some tips regarding this. Remember, before buying the waterproofing materials you need to carefully read the label and make sure that what you are purchasing is sufficient for your purpose. Also, before applying, make sure to follow the instructions to the letter. There are no shortcuts or alternatives for a "DIYer". You either follow the instructions painstakingly or fail in your project completely.

Water Repellant vs. Waterproofing

Water repellant allows the water to slide off the surface with the least amount of resistance and drop to the lowest point. This is not the same as basement waterproofing, which allows no moisture to seep into the interior from the exterior. However, by using both waterproofing and repellant, you can ensure that any water that does hit the exterior surface does not have a chance of seeping into unnoticed cracks and onto your interior.

One last thing, once you have totally sealed up your lower level and no new moisture is coming in, you may still have a problem with mold and mildew. This is very difficult to get rid of on your own. If your basement still shows signs of mold growth, mold removal professionals can help get rid of it and make your downstairs level healthy and livable again.


------

DryMaster – Basement Waterproofing Paramus NJ.  Our Paramus NJ Mold Removal Specialists adhere to simple guidelines of integrity and responsibility. Best Technology, Service and Pricing

Report this article Ask About This Article


Loading...
More to Explore